Operating Manual

50
3
Basic Operations
1 Press the { button.
The Fn menu appears.
2 Press the four-way controller
(3).
The flash options screen appears.
3 Use the four-way controller
(45) to choose a flash mode.
4 Press the 4 button twice.
The camera is ready to take a picture.
1 Set the mode dial to I, U, =, q, or ..
2 Press the shutter release
button halfway.
The built-in flash pops up if necessary
and begins charging. When the flash is
fully charged, b appears in the LCD
panel and viewfinder. (p.17, p.20, p.22)
Selecting Flash Mode
When the mode dial is set to e, b, c,
a or p, B and C appear gray and
cannot be selected.
Using Auto Discharge
B
,
C
(Automatic Flash Popup)
200
200
200
Fn
OK
Exit
Exit
Exit
Auto discharge
Auto discharge
Auto discharge
Flash Mode
Flash Mode
Flash Mode
OK
OK
OK
OK