User Manual

94
Shooting Functions
4
• The AF360FGZ will automatically convert the
field angle differential between 35mm and the
w format resulting from the focal length of
the lens you are using. (When using FA J, FA, or
F lenses)
• Display the format size for w during the
exposure metering timer of the camera is turned
on when combining the AF360FGZ with the
w. (It returns to a 35mm format display
when the exposure metering timer is turned off.)
Use this flash mode with the AF360FGZ flash unit. P-TTL auto flash, which
pre-fires the flash using the 16-segment metering allows more precise
control. P-TTL auto is available in wireless flash mode.
1 Remove the hot shoe cover and attach the flash unit.
2 Turn the external flash ON.
3 Set the flash unit mode switch to P-TTL auto.
4 Confirm that the flash is fully charged and then take the picture.
About the LCD panel display for AF360FGZ
Using P-TTL Auto Mode
• P-TTL auto is available with the AF360FGZ flash unit only. The mode will be
TTL auto when using a flash other than the AF360FGZ.
• The b will light in the viewfinder when the flash is fully charged.
• For details such as operation method and effective distance, please read the
external flash manual.
• The external flash discharges automatically when 3 is lit in on the LCD panel.
The flash does not discharge when the subject is bright enough, (therefore, it
may not suitable for daylight-sync shooting).
• Never press the flash pop up button when any external flash unit is attached
to the camera. The built-in flash will hit the external flash. If you want to use
both at once, see page 97 for the connection method.
Lens
used
AF 360
FGZ
display
85mm ⇔ 58mm
70mm ⇔ 48mm
50mm ⇔ 34mm
35mm ⇔ 24mm
28mm ⇔ 19mm
24mm ⇔ 16mm
20mm ⇔ 13mm