Operating Manual

74
Shooting Functions
4
There are 11 focus points in the autofocus frames. You can select the
focus points to use depending on the scene you are shooting.
The camera selects the optimum focus point position even if the subject is
not centered.
1 Set the focus point select dial
to 5.
The area in the autofocus frame is the
range available for autofocus.
There are 11 focus points in the autofocus frames. If the camera does not
select the desired focus point in Auto mode, you can select the desired
focus point manually.
1 Set the focus point select dial
to j.
Selecting the focus points
Setting the focus point mode to AUTO
• The focused point is superimposed in red in the viewfinder when the shutter
release button is pressed halfway down. The superimpose function can be
canceled using a custom function. See page 115 for setting Custom
Functions.
• The focus point is fixed to the center position regardless of this setting with
lenses other than FA J, FA, F lenses.
Selecting the Focus Point