Owner`s manual

Electromagnetic Compatibility 53

Recommended separation distances between

portable and mobile RF communications equipment and the EPK-p

The EPK-p is intended for use in the electromagnetic environment in which radiated RF disturbances are controlled. The

customer or the user of the EPK-p can help prevent electromagnetic interference by maintaining a minimum distance between

portable and mobile RF communications equipment (transmitters) and the EPK-p as recommended below, according to the

maximum output power of the communications equipment.

Rated maximum output power

of transmitter

Separation distance according to frequency of transmitter

150 kHz to 80 MHz

d = 1.2

80 MHz to 800 MHz

d= 1.2

800 MHz to 2.5 GHz

d= 2.3

0.01 0.12 m 0.12 m 0.23 m

0.1 0.38 m 0.38 m 0.73 m

1 1.2 m 1.2 m 2.3 m

10 3.8 m 3.8 m 7.3 m

100 12 m 12 m 23 m

For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters (m)

can be estimated using the equation applicable to the frequency of the transmitter, where P is the maximum output power

rating of the transmitter in watts (W) according to the transmitter manufacturer.

NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.

NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and

reflection from structures, objects and people..