Owner`s manual

Troubleshooting 49

J Error Messages

Message Meaning Solution

Reference

Page

Please replace the lamp 1

The lamp is not lit. Replace lamp 1 or lamp 2. P.25

Please replace the lamp 2

Please switch the lamp The lamp has gone out during use. Switch to the spare lamp. P.44

Scope is not Connected The scope is not attached. Attach the scope. P.18

Connected Scope is not

Compatible with this Processor

Please Contact with your

Distributor

The scope is not compatible. Use a K-series scope.

P.18

P.50

Scope Communication Error Communication with the scope failed. Reattach the scope. P.18

W/B Failed Please Retry The white balance is incorrect. Set the white balance again. P.27

Lamp Error

Please close Lamp Door

The lamp housing cover is open. Close the lamp housing cover. P.44

Lamp Switching Error Lamp is not positioned correctly.

Open the lamp housing cover and

check the harnesses are attached

correctly.

P.44 - 45