Owner`s manual

40 Operating Procedure
4
Initialize the settings.
1 Press the [Initialize] key.
• The [Do you want to reset all data?] confirmation message appears.
2 Use the [K] or [L] key to select [YES] and press the [Enter]
key.
• The confirmation message closes and all settings are reset to their
default values.
• If you select [NO] or do not perform an operation for at least
5 seconds, the confirmation message closes and the normal screen
reappears.
I "Default Settings" (P.54)
1 Press the [Scope Button 1] key.
• The function assigned to scope button 1 is activated.
1 Press the [Scope Button 2] key.
• The function assigned to scope button 2 is activated.
1 Press the [Scope Button 3] key.
• The function assigned to scope button 3 is activated.
1 Press the [Scope Button 4] key.
• The function assigned to scope button 4 is activated.
Switch between freeze mode and video mode.
1 Press the [Freeze] key.
•The normal screen is frozen and the scope video is displayed in a sub-
image on the monitor.
• If you press the [Freeze] key again, the sub-image disappears from the
monitor and the normal screen reappears.
+ + [Initialize] Key
+ [Scope Button 1] Key
+ [Scope Button 2] Key
+ [Scope Button 3] Key
+ [Scope Button 4] Key
+ [Freeze] Key
Ctrl
Alt
Del
Do you want to reset all data?
YES
NO
Ctrl
1
Ctrl
2
Ctrl
3
Ctrl
4
Ctrl
F
Sub-
Image
Main Screen