Owner`s manual

Operating Procedure 35
4
[Scope Button 1], [Scope Button 2], [Scope Button 3], and [Scope
Button 4]: Customize the functions of the scope buttons.
• Pressing [J] displays the scope button customize screen. The name of
the function assigned currently appears for [Mode]. Press the [I] or [J]
key to cycle through the settings of [Trigger], [Freeze], [Zoom], [Ave/
Peak], and [None]. There may be an option to configure advanced
custom settings when you assign some functions.
• Settings that can be configured on the customization screen:
[Remote 1], [Remote 2], [Remote 3] and [SERIAL]
[Freeze Mode]: Determines whether freeze mode ends after you press a
button to copy an image in freeze mode or stays frozen. Set to [Release]
to end freeze mode and set to [Keep] to have the image frozen.
• Press the [Esc] key to return to the configuration screen where any
changes to settings in the customization screen will be discarded.
[Remote Function]: Change the remote function and counter settings.
• Pressing [J] displays the remote function customization screen.
• Settings configurable on the customization screen:
[Remote 1] and [Remote 2]: [Pulse] or [Toggle] (Default setting: [Pulse])
[Film Counter]: [F1 to 99]/[F1/2]/[F1/4]/[F1/8]/[F1/16] (Default setting: [F1 to 99])
[Zoom]: Switch the zoom of the magnification function to any of [2.0], [1.5], [1.2], [1.2/1.5/2.0], [1.2/1.5], [1.5/2.0], [1.2/2.0],
[1.2/1.5/1.2], [1.5/2.0/1.5], [1.2/2.0/1.2] and [1.2/1.5/2.0/1.5/1.2]. (Default setting: [1.2/1.5/2.0])
Settings in the [Display] Tab
[Image Size]: Change the size of the main screen.
• Press the [I] or [J] key repeatedly to change the setting to [Normal] or
[Medium]. (Default setting: [Normal])
[Sub Image]: Change the display position of the sub-image.
• Press the [I] or [J] key repeatedly to change the setting to any of [Upper Right], [Middle Right], [Lower Right], [Upper
Left], [Middle Left] and [Lower Left].
• Sub image can only be displayed in [Upper Right] position when [Medium] is selected for the [Image Size].
[Normal] [Medium]
Set Up Display Process
Data & Time 24/04/07 14
:
57
:
22 Scope Button 1
Lamp
:
Off
Scope Button 1
Scope Button 2
Scope Button 3
Scope Button 4
Mode
:
Freeze
Remote 1
:
Off
Remote 2
:
Off
SERIAL
:
Off
Remote Function
Freeze Mode
:
Release
Zoom
:
1.2/1.5/2.0
Finish
:
Enter
Cancel
:
Esc
Select
:
Edit Info
:
[Scope Button 1] Screen
Set Up Display Process
Image Size
:
Normal
SubImage
:
Upper Right
Image Direction
:
Normal
Disp SCOPE
:
Off
PENTAX
:
Off
FilmCounter
:
On
Disp NAME
:
ID
:
On
On
On
On
On
On
On
On
On
AGE
:
SEX
:
DR.
:
Facility
:
Comment
:
TIME
:
DATE
:
Finish
:
Enter
Cancel
:
Esc
F3
:
Reset Data Ctrl F12
:
Apply to all users
Select
:
Edit Info
:
[Display] Tab