Owner`s manual

ManualsBrandsPentax ManualsComputer equipmentEPK-P

34 Operating Procedure

Change the contrast setting.

Press the [Contrast] key.

• The current contrast setting appears on the monitor for about

3 seconds.

Press the [I] or [J] key repeatedly to cycle through the

settings of [Normal], [High], and [Low]. (Default setting:

[Normal])

Press the [Enter] key or [Esc] key.

• Pressing the [Enter] key returns to the normal screen where any

change to the contrast setting will be reflected.

• Pressing the [Esc] key returns to the normal screen where any change

to the contrast setting will be discarded.

• If you do not press any key for a few seconds, the normal screen will be displayed automatically and any changes to

the contrast setting will be reflected.

Display the configuration screen.

Press the [Menu] key.

• The configuration screen appears.

• The configuration screen contains the [Set Up] tab, [Display] tab, and

[Process] tab.

Position the cursor on a tab and use the [I][J]/[Tab] keys

to select a tab.

Use the [K] and [L] keys to select a setting and press the

[J] key.

• The method used to configure a setting will depend on the setting

being changed. Some settings require pressing the [I] or [J] key

repeatedly to change the value and some settings require advanced

settings to be configured on a sub-screen.

Press the [Enter] key or [Esc] key.

• Pressing the [Enter] key returns to the normal screen where any changes to the settings will be reflected.

• Pressing the [Esc] key returns to the normal screen where any changes to the settings will be discarded.

Settings in the [Set Up] Tab

[Date & Time]: Change the date and time and display format.

• Pressing the [J] key displays the [Date & Time] screen.

[Format]: Select a display format for the date and time from [YY/MM/DD],

[MM/DD/YY], and [DD/MM/YY]. (Default setting: [DD/MM/YY])

[Year]/[Month]/[Date]/[Hour]/[Minute]/[Second]: Change the date and

time.

[Lamp]: Change the lamp mode operation setting for when the processor is

turned on.

• Press the [I] or [J] key repeatedly to change the setting to any of [Start]

(the lamp lights when you turn on the processor), [Off] (the lamp remains

off when you turn on the processor but lights when the lamp switch is

pressed), and [Lock Lever] (The lamp lights when the scope locking lever

is moved all the way to the LOCK position.). (Default setting: [Off])

[Contrast] Key

[Menu] Key

Contrast

Normal

F10

Set Up Display Process

Data & Time 24/04/07 14

Lamp

Off

Scope Button 1

Scope Button 2

Scope Button 3

Scope Button 4

Remote Function

Zoom

1.2/1.5/2.0

Finish

Enter

Cancel

Esc

Reset Data Ctrl F12

Apply to all users

Select

Edit Info

Configuration Screen