Owner`s manual

30 Operating Procedure
4
J Function of Each Key
Display the patient list.
1 Press the [Patient] key.
• The [Patient’s List Preset 1] screen (registration numbers 1 to 10)
appears.
• Press the [Patient] key to switch the display between the patient list
and the normal screen.
2 Use the [K][L]/[Tab] keys to select a patient.
• Use the [K][L]/[Tab] keys to move to the [Patient’s List Preset 2]
screen.
3 Press the [J] key.
• The [Patient’s xx Information] screen for the selected patient appears.
The registration number in the patient list appears instead of [xx].
• Follow the procedure below to enter or change data in [Patient’s xx
Information].
1 Use the [K][L]/[Tab] keys to select an item.
2 Use the alphanumeric keys to enter or change data.
3 Press the [Enter] key or [Esc] key. The [Patient’s List Preset 1 to 4]
screen reappears.
Pressing the [Enter] key reflects any data entered and changes
made and pressing the [Esc] key discards any data entered and
changes made.
4 To enter or change data for another patient, use the [K][L]/[Tab] keys to select a patient and
repeat Step 3.
5 Press the [Enter] key or [Esc] key.
• Pressing the [Enter] key returns to the normal screen with the information of the patient selected in the [Patient’s List
Preset 1 to 4] screen.
• Pressing the [Esc] key returns to the normal screen displayed prior to the [Patient’s List Preset 4] screen.
CAUTION
Register new patient data.
1 Press the [New patient] key.
• The [Patient’s Information] screen appears.
2 Use the [K][L]/[Tab] keys to select an item.
3 Use the alphanumeric keys to enter or change data.
4 Press the [Enter] key or [Esc] key.
• The normal screen reappears.
• Pressing the [Enter] key returns to the normal screen where any data that
was entered and any changes that were made on the [Patient’s
Information] screen are reflected.
•
Pressing the [Esc] key returns to the normal screen where any changes to
settings made on the [Patient’s Information] screen are discarded and the
existing data is displayed.
[Patient] Key
If the capture function is enabled, do not use any special symbols such as the ones below for [Name] and [ID].
¥ / : * ? " < >
[New patient] Key
F1
Patient's List Preset 1
1. Thomas Smith N0001 31 M
3. Elizabeth Lewis E0001 67 F
5. Rachel Taylor A0001 89 F
7. Mary Clark S0002 54 F
6. Robert Moore N0003 53 M
4. William White S0001 29 M
9. Richard Walker C0001 76 M
10. Linda Green N0004 45 F
8. Christine Baker A0002 16 F
2. Michael Brown N0002 24 M
Name
Select
:
Edit Info
:
Display
:
Enter
Cancel
:
Esc
F3
:
Reset Data
Scroll Page
:
PageUp/PageDown
ID Age Sex
[Patient’s List Preset 1] Screen
Patient Information
Name Thomas Smith
ID
AGE
SEX
COMMENT
N0001
31
M
Good nutrition
Select
:
Display
:
Enter
Cancel
:
Esc
F3
:
Reset Data
[Patient’s xx Information] Screen
F2
Patient Information
Name
ID
AGE
SEX
COMMENT
Select: Display: Enter
Cancel: Esc
F3: Reset Data
[Patient’s Information] Screen