Owner`s manual

Preparation 19

Insert the air pipe stem of the water bottle into the

water bottle receptacle of the processor until it clicks

into place. (Refer to Figure 2.4)

NOTE

Insert the air/water connector into the air/water port

of the PVE connector. (Refer to Figure 2.5)

Connect the suction tube of the suction unit to the

suction nipple of the PVE connector. (Refer to Figure

2.6)

CAUTION

J Connecting a Fiberscope

Insert the light guide of the fiberscope into the light guide attachment of

the processor. (Refer to Figure 2.7)

z The use of excessive force may cause the processor or the

water bottle to leak water inside the processor. Remove the

water bottle before moving the processor or before packing the

processor for shipment.

z Make sure the scope is inserted slowly and correctly.

z Do not use the scope locking lever to help move the processor.

Figure 2.4

Air/water Connector

Air/water Port

Figure 2.5

Figure 2.6

Suction Tube

Suction

Nipple

Light Guide

Figure 2.7