Owner`s manual

12 Names and Functions of Parts
1
Rear Panel
RGB OUTPUT (Video out)
This connector is for outputting video signals
(RGB color signals and synchronous signals)
to send to a monitor or image processor.
Power Input Socket
Insert the AC power cord.
Y/C OUTPUT
These connectors (separated video
outputs) are for outputting separate video
signals (video signals separated into
luminance signals and color signals) to
send to a monitor or image processor.
VIDEO OUTPUT
This connector is for outputting composite
video signals (BNC connectors) to send to
a monitor or image processor.
Ventilation Grid
Note
Install the processor
in a location where
the ventilation grid
will not be blocked.
Rating Plate
This plate shows the processor rating
specifications, acquired standards, etc.
Potential Equalization Terminal
This terminal is used with a potential
equalization busbar to equalize the
potential of other equipment connected
to the processor.
REMOTE
These connectors are for when
you want to remotely operate
peripheral devices.
YOUTPUT
This connector (BNC connector) is for
outputting black and white video signals.
Fuse Box
This fuse box
contains 2 fuses.
I “Replacing the
Fuses” (P.46)
KEYBOARD
This connector is for connecting a
keyboard. You can connect a general
purpose keyboard (US layout).
SERIAL
This connector is for
outputting the digital
data of still images.