Owner`s manual

Names and Functions of Parts 11
1
CAUTION
Front Panel
The lamp life for the EPK-p processor is 50 hours. Check the service lamp life indicator on the front panel before you
use the processor. When the lamp needs to be replaced, the service light will illuminate in orange for either service light
1 or 2 and "Please replace lamp (1 or2)" appears on themonitor. Check the service light and correctly identify which lamp
needs to be replaced and replace the appropriate lamp with a new one.
I “Replacing the Lamp” (P.44)
Lamp Switch c
Use this switch to turn
the lamp on or off.
I “Lamp Switch”
(P.25)
Measuring Method Switch d
Use this switch to change the measuring method if you selected [AUTO] with K.
AVE: Measure based on the average brightness value for the whole screen.
PEAK: Measure based on the maximum brightness value for the screen.
I “Measuring Method Switch” (P.26)
Lamp Life Indicator
An indicator lights green when the lamp can be
used. If a lamp goes out, the indicator lights
orange. Replace the lamp.
I “Replacing the Lamp” (P.44)
Exposure Control Switch K
Use this switch to change the method of
adjusting the screen brightness.
AUTO: Adjust the screen brightness
automatically.
MANUAL: Adjust the screen brightness
manually.
I “Exposure Control Switch” (P.26)
Adjustment Switches
If you adjust the brightness and the red and blue color
tone levels of the screen with ab, the levels are
indicated by the indicators.
BRIGHTNESS: Adjust the brightness of the screen.
RED: Adjust the red color tone of the screen.
BLUE: Adjust the blue color tone of the
screen.
I “Adjustment Switches” (P.27)
White Balance Switch N
Adjust the white balance.
I “White Balance Switch” (P.27)
Pump Switch e
Use this switch to turn the pump
on or off.
I “Pump Switch” (P.26)
Pump Power Switch f
Use this switch to set the strength of
the air and water supply of the pump.
I “Pump Power Switch” (P.26)