Owner`s manual

10 Names and Functions of Parts

1 Names and Functions of Parts

WARNING

Main Unit

Be sure to turn off the processor before you attach or remove the scope.

The light guide and electrical connector of the scope and the pins may be hot directly after use. Do not touch these parts

and hold a plastic part of the scope when, for example, removing the scope.

Front Panel

I “Front Panel” (P.11)

Power Switch

Turn the power on or off.

side: Power on

side: Power off

Light Guide Attachment

Insert the light guide of a

scope.

Lamp Housing Cover

Open this door when you want to replace a

lamp.

I “Replacing the Lamp” (P.44)

Ventilation Grid

This is a ventilation grid for

the cooling fan.

Note

Install the processor in a

location where the

ventilation grid will not be

blocked.

Scope Locking Lever

Locking/unlocking lever for when you attach or remove a scope.

Endoscope Electrical Connector

Insert the electrical connector of a scope.

Water Bottle Receptacle

Insert the air pipe stem of a water

bottle.

Ventilation Grid Guard

Spacer for preventing the

ventilation grid on the side

from being blocked.