user manual
Table Of Contents
- For Using Your Camera Safely
- Care to be Taken During Handling
- Contents
- Composition of the Operating Manual
- 1 Before Using Your Camera
- 2 Getting Started
- 3 Basic Operations
- 4 Shooting Functions
- 5 Shooting Settings
- 6 Playback Functions and Image Editing
- 7 Changing Additional Settings
- 8 Connecting to a Computer
- 9 Using the Flash
- 10 Appendix
274
Appendix
10
This function is not available
in the current mode
You are trying to set a function that is not
available in n, H or C mode.
Camera overheated.
Disabling Live View
temporarily
to protect circuitry
Live View cannot be used because the camera’s
internal temperature is too high. Try using Live
View again when the camera has cooled down.
The camera will turn off
to prevent damage from
overheating
The camera will turn off because its internal
temperature gets too hot. Leave the camera
turned off and give it enough time to cool down.
Turn it on again after a while.
Set the Eye-Fi communication
to "SELECT"
Images cannot be transferred when [Eye-Fi
Communication] is not set to [SELECT] in [Eye-
Fi] of the [R Set-up 2] menu. (p.228)
Error Messages Description