User's Manual
Table Of Contents
- For Using Your Camera Safely
- Care to be Taken During Handling
- Contents
- Composition of the Operating Manual
- 1 Before Using Your Camera
- 2 Getting Started
- 3 Basic Operations
- 4 Shooting Functions
- 5 Shooting Settings
- 6 Playback Functions and Image Editing
- 7 Changing Additional Settings
- 8 Connecting to a Computer
- 9 Using the Flash
- 10 Appendix
118
Shooting Functions
4
When an image is tilted, it can be corrected up to a maximum of ±1.0
degrees (when Shake Reduction is turned on).
1
Select [Horizon Correction] in the [A Rec. Mode 3] menu.
2
Use the four-way controller (45)
to select P (Off) or O (On).
3
Press the 3 button.
The screen that was displayed before selecting the menu item appears
again.
4
Aim the camera at the subject, and press the shutter
release button halfway.
When [Horizon Correction] is set to On by selecting the check box, the
following indicators appear on the status screen or Live View screen.
Correcting the Tilt of the Images
D Shake Reduction On + Horizon Correction On
E Shake Reduction Off + Horizon Correction On
High-ISO NRHigh-ISO NR
Slow Shutter Speed NRSlow Shutter Speed NR
MENU
123 4
Shake ReductionShake Reduction
Input Focal LengthInput Focal Length
ExitExit
Composition Adjust.Composition Adjust.
Electronic LevelElectronic Level
Horizon CorrectionHorizon Correction