Operation Manual

36
2
You can configure the various settings, such as catchlight or AF
spot beam, in the function menu.
Refer to page 37 for each function menu item.
1 Turn on the power switch (ON).
2 Press and hold the function button ( ).
3 Rotate the adjustment dial to display the desired setting
item.
4 Press the setting button (SET) to blink the setting option.
5 Rotate the adjustment dial to select the desired setting
option.
6 Press the setting button (SET) to complete the setting.
• To exit the function menu, press and hold the function
button ( ) again.
Using the Function Menu
Function menu
AF360FZ_540FGZ.book Page 36 Friday, December 20, 2013 6:11 PM