Operation Manual

30
2
n Taking Pictures/Shooting Movies with LED Beam (LED
Beam Mode)
1 Turn on the power switch (ON).
2 Press the LED button (LED) to turn on the LED beam. LED
is displayed on the LCD panel.
3 Take a picture after confirming the flash output of the LED
beam.
• You can change the flash output of the LED beam from
1/1 to 1/16 by rotating the adjustment dial while the LED
beam is lit.
• In the function menu, you can set the option of LED beam
mode (SP) when taking a picture. (Refer to page 38.)
LED beam mode
AF360FZ_540FGZ.book Page 30 Friday, December 20, 2013 6:11 PM