Operation Manual

29
2
n Wireless Mode (Manual)
1 Turn on the power switch (ON).
2 Press the flash mode button (MODE) to display
M SLAVE on the LCD panel.
• You can set the flash output from 1/1 to 1/256. (Refer to
page 18.)
• You can set the zoom position (flash coverage angle) as
in manual mode. (Refer to page 21.)
3 Take a picture after confirming the Ready lamp is blinking.
• SLAVE is only selectable when in wireless mode
(manual).
• Refer to “Advanced Functions” (page 40) on how to use
wireless mode in details.
Wireless mode (manual)
AF360FZ_540FGZ.book Page 29 Friday, December 20, 2013 6:11 PM