User manual

12. SettingsinOSDmenu
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
OpentheOSDmenubypressingthemenubuttononceortwice[13].
Movetotherequirediconusingthedirectionbuttons[12].
PresstheOK[16]buttontoselecttheicon.
ChoosethedesiredsettingusingthedirectionbuttonsandtheOKbutton.
Usethemenubuttontogobackinthemenu.
PressthemenubuttononcemoretoleavetheOSDmenu.
The OSD menu will close automatically after 20 seconds if no buttons are
pressed.
PresstheOKbuttononce.
Set time and date using the direction buttons and confirm with the OK
button.
PM-afternoon
AM-morning
For resetting the camera to factory default settings, select "Set to factory
default".
SelectYESusingthedirectionbuttons.
ConfirmusingtheOKbutton.
camerasetup: channel1ON/channel2OFF/channel3OFF/channel4OFF
powersaving: ON
Scanperiod: OFF
brightness: 3
Usethedirectionbuttonstoselecttherequiredchannel.
Use the OKbutton to activate (ON) or deactivate (OFF) the camera paired
onthatchannel.
The scan period function can beused when more than one camera is paired to
themonitor.
Using the direction buttons select between OFF (no switching or quad
display),5Sec.or15Sec.(automatic switchingin5or 15secondinterval,
between the activated channels) or Quad (Quad display): up to 4 camera
pictures are displayed in split screen, if a camera is not connected or not
activated, then the corresponding area of the screen remains black. You
can use the direction buttons to switch between the different areas of the
screen.
ConfirmusingtheOK-button.
Thecamera includedinthesetis alreadypaired withthe monitoronchannel1.
If you wish to pair the camera to a different channel or pair an additional
camera(max.3additionalcameras)tothemonitor:
OpentheOSDmenubypressingthemenubutton[13].
Selectthedesiredchannelusingthedirectionbuttons.
ConfirmusingtheOKbutton.
Pressthepairingbutton[25]ofthecamerawithin60seconds.
12.1 SystemSetup[49]-settimeanddate/reset
12.2 Camera Setup [50] - camera activation / Scan Period -
automaticswitching/ quaddisplay
12.3 Pairing[51]-pairingofcameraandmonitor
factorydefaultsettings:
12.4 Power-Saving [52]-power savingmode
12.5 AlarmSetup[53]-selectalarmfunctions
12.6 Brightness[57]-setbrightness
12.7 VOXSetting[54]-voicedetection
12.8 Playback[55]-playbackofrecordings
12.9 SD Card Format [56] - formatting of SD card / deletion
of recordings
!
!
!
!
!
!
!
!
!
!
!
!
!
Activate(ON)ordeactivate(OFF)usingthedirectionbuttons.
ConfirmusingtheOKbutton.
If the power saving mode is activated the camera picture will disappear after
approx2 minutesif nobuttonsarepressed, the audiofunction remainson and
the power LED is still illuminated. The picture can be recalled by pressing any
button.
Selectthealarmmodeusingthedirectionbuttons.
UsetheOKbuttontoswitchonoroff.
Ineachalarmmode,themonitorwillgiveanalarmfor15seconds.
VOX-whenthecameraistriggeredbyvoice
Batterylow-whenthecamerabatteyislow
Outofrange-whenthecameraorthereceiverisoutofradiotransmittingrange
Select the desired picture brightness (value 0 through 5) using the
directionbuttons
In "VOX Sensitivity", use the directionbuttons to switchvoice detection on
or off or adjust the vox sensitivity level (level 1 = low sensitivity, only
reacts to loud sounds; level 3 = high sensitivity). Confirm using the OK
button.
In "VOX Activate Recording", use the direction buttons to select on or off,
and confirm using the OK button. If this function as well as the voice
detection are activated and a formatted SD-card is inserted into the
monitor, a video sequence of approx. 30 seconds is automatically
recorded. Recording can be stopped manually before the 30 seconds are
over.
Voice detection is only possible with the camera DF15K. The camera
DF20K is equipped with a very sensitive microphone and thus will record
permanentlyin"VOXActivateRecording"setting.
If voice detection is activated, video images cannot be displayed in quad
format.
Use the direction and OK button to select the desired date file (in
chronologicalorder)andthedesiredrecording(markedwithgreencursor).
Press the OK button to select the recording, thefirst frame of therecording
isshown.
Usethedirectionbuttons [12: / ]to2x/4x/8xfastforwardorreverse.
Withthe[12: ]buttontheplaybackcanbestopped.Usethemenubuttonto
go back tothe date file. Alternativelythe videos on theSD-card can be viewed
onaPCwithavideoviewerapplication(Mediaplayer).
Usethedirectionbuttonstoselectformat
ConfirmwiththeOKbutton
FormattingdeletesalldataontheSD-card.
24 - GB