OMNIFILTER PREMIUM CHROME SHOWER FILTER PSF-1C-P Installation Instructions pentair.
Notice For best results, use the shower head provided with this system. COMPLETE PARTS LIST Note: The parts supplied are intended to accommodate a variety of water supply lines. Additional fittings may be needed to fit to your plumbing. Description Qty. Description Qty. Shower Filter Body, Jacket and Cartridge (already assembled) 1 Fragrance Block (Optional) 1 Shower Head 1 Plumber's Tape 1 REMOVE SHOWER HEAD Remove your existing shower head from the supply pipe.
Caution Ensure the rubber washer is in place in the chrome inlet collar. FILTER ATTACHMENT 1. Wrap plumbers tape five (5) or six (6) around the shower pipe. 2. Attach the shower filter body to the side of the shower pipe with the chrome collar. (Figure B) 3. Turn clockwise to tighten. 4. Use a pair of pliers to turn the chrome collar until the filter system is firmly tightened. Caution Do not over tighten the chrome inlet collar.
PRODUCT OPERATION AND SPECIFICATIONS Specification Description PSF-1C-P (SFS-SG-15000-QC-1) Maximum Flow Rate 1.5 GPM (High-Flow Setting) Operating Pressure 80 PSI Operating Temperatures 115°F Rated Capacity 15,000 Gallons Replacement Filter PSF-1R (SFRC-SG-15000-QC-1) MAINTENANCE When should I replace the filter cartridges? The Pentair Shower Filter should be replaced every six (6) months to ensure peak performance.
