PENTAIR HOME FOR INTELLIFLO3™ AND INTELLIPRO3™ VSF VARIABLE SPEED AND FLOW PUMPS USER'S GUIDE IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL INSTRUCTIONS SAVE THESE INSTRUCTIONS
ii CUSTOMER SERVICE / TECHNICAL SUPPORT If you have questions about ordering Pentair replacement parts, and pool products, please contact: Customer Service Technical Support Customer service PISA, ITALY (8:30 AM to 4:30 PM CET) +39 050716166 / +39 050716169 orders.pooleu@pentair.com poolemea@pentair.com www.pentairpooleurope.com e-mail: techsupport.poolemea@pentair.com Hotline: +33 184280940 TABLE OF CONTENTS INTRODUCTION .....................................................
1 INTRODUCTION The Pentair Home app is the perfect solution for remotely monitoring and controlling your pool equipment from anywhere. This guide provides instructions on creating an account and using Pentair Home to get the most out your Pentair Home account and your connected pool products. Home Dashboard From the Home Dashboard you can remotely monitor and control your pool and equipment. Press a specific equipment tab to display controls.
2 INITIAL SETUP Creating a Pentair Home Account 1. From your chosen smart device, download Pentair Home from the Google Play® store (Android® devices) or Apple® app store (iOS® devices). Note: Apple operating systems must be iOS® 11 or later. Android operating systems must be version 6.0 or later. 2. Open the Pentair Home app ( ) from your smart device. 3. A series of marketing screens will display. Press SKIP to jump to account creation. 4. The Email Entry screen will display.
3 Pairing Devices to your Account Several smartphone functions will be used to successfully pair your pump to your Pentair Home account. Before signing into the app ensure: • Your smartphone's Bluetooth® wireless technology is turned on • Your smartphone's location service is on • Pentair Home has your smartphone's camera permissions TO PAIR A PUMP TO YOUR ACCOUNT: 1. Sign into your Pentair Home account. 1 2. The Home Dashboard screen will display (FIGURE 3). Press ADD A DEVICE [1]. 3.
4 OPERATION Pump Dashboard The Pump Dashboard is your pump's home page. Basic pump info, run status and programming can be viewed from this screen. If any pump alerts and problems are present they will also display at the top of this screen. 1− Device Settings: Tap to display the Device Settings screen. Most of the pump features and settings can be accessed from the Device Settings screen. Refer to Device Settings, page 6. 2− Enabled/Disabled Toggle: Tap to enable or disable your pump.
5 Program Setup The pump allows you to create and customize up to 8 unique programs. The pump also features a default Quick Clean program that can be customized, but not renamed or deleted. 1- Schedule Enabled/Disabled Toggle: Tap to enable or disable a Schedule Program. If disabled, the schedule program is inactive and will not run until it is re-enabled. This toggle will only appear if a program is Schedule Mode.
6 Device Settings Device Settings can be accessed by pressing the Device Settings gear icon ( Dashboard. ) in the top-right of the Device 1− Product Overview: View and edit general information about your IntelliFlo3 VSF such as device nickname or address. 2− Notifications: Control where and how device notifications are delivered. 3− Product Support: Opens www.pentair.com 4− Remote Monitoring: Use your address to find and contact local pool professionals offering to monitor your pump remotely.
7 Direct Connect Pump Dashboard ˃ Device Settings ˃ Direct Connect. Place your pump into Direct Connect mode to program and operate your pump without a WiFi connection via a Bluetooth® wireless technology connection. To setup and operate the pump through Direct Connect your phone must be within Bluetooth range of the pump and the phone's Bluetooth must be enabled. SET-UP WIFI: Tap to establish a WiFi internet connection between your phone and the pump. WiFi will now be your primary connection.
8 Priming Parameters Pump Dashboard ˃ Device Settings ˃ Priming Parameters All priming settings can be edited and set from this screen. Tap a specific setting on the right-side of the screen to edit. 1- Enabled/Disabled: ENABLED allows the pump to detect whether or not the system is properly primed for pump startup. If prime is not detected the pump will enter a priming cycle, based on the settings below. 2− Priming Speed: Set the speed the pump will run during a priming cycle.
9 Thermal Mode Pump Dashboard ˃ Device Settings ˃ Thermal Mode. Thermal Mode is intended to help protect the pump during freezing or near-freezing conditions. Note: Do not depend on this feature for freeze protection of the entire filtration system and pool. Certain situations could cause the pump to sense a different temperature than actual air temperature. Your automation system air temperature sensor should be used to sense actual temperature.
10 TROUBLESHOOTING Alarms and Warnings When an alarm is triggered the drive's ON/STOP LED will blink RED and a fault code will display. The pump will stop until the alarm is resolved. When a Warning is triggered the drive's ON/STOP LED will blink GREEN/YELLOW and a fault coded will display.
11 NOTES INTELLIFLO3™ VSF and INTELLIPRO3™ VSF Variable Speed and Flow Pump User's Guide
Waste treatment of electronic devices at the end of their service life: The crossed-out bin placed on the main parts which make up the product indicates that it must not be disposed of together with the household waste. It must be returned to an appropriate collection point for electronic device recycling (information available from the local household waste collection service). This product contains potentially dangerous substances which may have adverse effects on the environment and humain health.
