User Manual

INTELLIMASTER Variable Speed Controller User Manual
7
CONTROL PARAMETER SETTING
Set Pressure Refers to the operating set pressure.
Run Deviation
Refers to the run deviation in which the operating of the
system starts.
Stop Delay Refers to the stop delay time of the system.
Restart Delay Refers to the start delay time of the system.
Shift Time Refers to the time when the lead pump alternates.
Maximum Runtime
Maximum time in minutes the pump is allow to operate
continuously, this feature is disabled if value is set to 0.
P
It is relevant to ‘P’ (Propotional Constant) out of the PID
controls.
I It is relevant to ‘I’ (Integral Constant) out of the PID controls.
D
It is relevant to ‘D’ (Differential Constant) out of the PID
controls.
Low Pressure Alarm
If the operation pressure is lower than the set pressure,
alarm will occur.
Low Pressure Value Setting the low pressure limit.
Low Pressure Stop
Once the low pressure alarm occurs, the system will
operate duration of the set delay time and afterwards the
system will stop.
Low Pressure Restart
Setting the low pressure restart time. The system will
restart after the set value.
Low Pressure Restart
Time
Setting the low pressure restart cycle. The system will stop
ater the set cycle.
Pressure Unit
Setting the Pressure unit.