User's Manual

67
EasyTouch Wireless Control Panel Installation and User’s Guide
Connecting the Transceiver to the EasyTouch Load Center
WARNING - Switch OFF the main system power to the EasyTouch load center before making any
connections.
1. Unlatch the two enclosure door spring latches, and open the door.
2. Remove the two retaining screws securing the high voltage cover panel, and remove it from the
enclosure.
3. Loosen the two access screws securing the control panel.
EasyTouch Load Center (front view)
High voltage
cover panel
Retaining screw
Control panel
access screw
Control panel
access screw