User's Manual

9
EasyTouch Wireless Control Panel Installation and User’s Guide
Quick Start - Pool and Spa Operations (Shared Equipment)
The following describes how to adjust heat temperature for the spa and pool water, schedule a daily run time
for the pool/spa filter pump and control lights for shared equipment.
Heating the Spa
Heating the spa water on demand is easy, just press the SPA button to switch the heater on and display the
current temperature settings on the EasyTouch Wireless Control Panel. “Heater” will be displayed on the screen
when the heater is active. The heater is active when the set temperature is higher than the water temperature.
The heater will switch off when the water temperature rises above the set temperature. For more information
about the spa manual heating “MAN HEAT” feature, see page 38. Pressing the Spa button will switch the filter
pump on and rotate the spa valve actuator to isolate and circulate the spa water from the pool water.
Heating the Pool
Heating the pool water is normally part of the daily scheduled program (see page 25). However, if you need to
adjust the pool water temperature, press the Pool (P) button to display the current temperature settings on the
EasyTouch Wireless Control Panel. “Heater” will be displayed on the screen when the heater is active and a
heat source has been selected in the Heat menu. The heater is active when the set temperature, as specified in
the Heat menu, is higher than the water temperature. For more information about selecting a heat source and
setting the pool water temperature setting, see page 23. Pressing the Pool button will switch the filter pump on
and rotate the pool valve actuator to isolate and circulate the pool water from the spa water.
Adjusting the water temperature setting
To adjust the set temperature setting for the pool or spa water, either use the Left arrow button to lower the
temperature setting or the Right arrow button to higher the temperature setting.
POOL button
EasyTouch Wireless Control Panel
AUTO HEATER
SPA 85°F / 100°F
AIR 70°F
MON 09:30 AM
RIGHT arrow button
Raise water set point temperature
LEFT arrow button
Lower water set point temperature
SPA button