User's Manual

53
EasyTouch Wireless Control Panel User’s and Installation Guide
Glossary
High Voltage Compartment: Large lower right compartment of Load Center for all high voltage wiring
including circuit breakers, relays, and GFCI.
Indoor Control Panel: Optional nine or 14 button remote controller with LCD (liquid crystal display) wired to
the EasyTouch motherboard in the load center. The control panel can be wall mounted inside the house to
control the EasyTouch system.
iS4: Optional four function Spa-Side remote. Can be spa wall or deck mounted.
Load Center: Metal enclosure with power relays, transformer, and circuit breakers. Used for distributing
power for controlling the EasyTouch system. Also known as the “sub-panel.”
Low Voltage Compartment: Top compartment of EasyTouch load center for all low voltage wiring.
Low Voltage Raceway: Vertical space in the left side of EasyTouch load center for low voltage cabling.
Control Panel: Control panel with flexible hinge installed in upper portion of EasyTouch Load Center to
control the EasyTouch system.
Motherboard: The circuit board mounted on top of the EasyTouch control panel.
Receiver/Antenna: Used with the QuickTouch (QT4) to receive radio frequency (wireless) transmissions.
Relay Circuits: The circuits that control the relay outputs on the EasyTouch motherboard. Connectors are
located on the top edge of the circuit board.
Screw Terminal Connector: Removable connector that may attach to circuit board with multiple sockets
(anywhere from 2 to 12) to receive wires from controllers and sensors; wires held by screw terminals; multiple
wires of a small enough gauge (usually 22 AWG) may be coupled to a single socket of a terminal connector.