User's Manual

51
EasyTouch Wireless Control Panel User’s and Installation Guide
Connecting the EasyTouch Transceiver to the EasyTouch Load Center
WARNING - Switch OFF the main system power to the EasyTouch load center before making any
connections.
1. Unlatch the two enclosure door spring latches, and open the door.
2. Remove the two retaining screws securing the high voltage cover-panel, and remove it from the
enclosure.
3. Loosen the two access screws securing the control panel.
4. Lower down the hinged control panel to access the EasyTouch motherboard.
Panel retaining screw
(Cover-panel not
shown)
Access
screw
Retaining
screw
Access
screw
Control panel
Raceway
Control panel
Personality