User's Manual
8
EasyTouch Wireless Control Panel User’s and Installation Guide
➆
➇
V
U
Z
Controls and buttons (Continued)
Right button: Use the Right button to select a sub-menu item for editing. After pressing the Menu
button to access the main menu items, use the Right button to select the menu item and access the
sub-menu items for adjustment. For convenience, while editing a settings, press and hold the Right
button to fast forward through settings and values.
Up/Down buttons: Use the Up and Down buttons to scroll through the main menu items and to
adjust or change settings. Use these buttons after pressing the Menu/Select button to access the
main menu items. While editing settings, press and hold the Up or Down button to fast forward or
fast reverse through settings and values.
EasyTouch Wireless Control Panel Display
The EasyTouch wireless control panel screen displays when the system is in automatic mode (AUTO) or in
service mode (SERVICE). Service mode is enabled from EasyTouch outdoor control panel at the pool
equipment pad. The following describes the main status screen.
AUTO (Automatic): The system is in normal operating mode.
Scheduled programs will run automatically.
HEATER: Displays the heat source (Off, Heater, Solar Prf.,
Solar) as specified in the Heater menu settings (see page 18).
POOL (Spa): Indicates that the Valves (V) button is in “Pool” or
“Spa” mode and the Filter Pump (F) button has been pressed to
switch on the filter pump. If this display line is blank, it indicates
no spa or pool function is active. For an EasyTouch single body
system, Hi-Temp (Spa) / Lo-Temp (Pool) sets the temperature
settings (see page 26)
95° F / 100° F: Displays the actual spa or pool water temperature
(95° F) and the set point temperature (100° F) as set in the
“Heater” menu.
AIR: Displays the actual outside air temperature (70° F) as read
by the air sensor located near the EasyTouch Load Center.
Date and Time: Displays the EasyTouch system day and time as
specified in the “Clock” menu settings (see page 24).
AUTO HEATER
SPA 95°F / 100°F
AIR 70°F
MON 09:30 AM
POWER ON