Quick Start Guide

PENTAGRAM TAB 8.0 [P 5332]

Battery charging

Before you start to operate the device, it is recommended to charge and discharge the battery several times so

that it reaches its full performance and service life.

In the top right corner of the main menu there is an icon representing the battery charge. When the icon is filled

with bars, it means the battery is fully charged. If the icon is empty, the battery is very low and you have to

charge it as quickly as possible. The battery will start charging automatically after connecting the device to the

AC charger or the car charger, plugged in the appropriate socket. During charging, you can operate the device as

normal. The light on the side panel is an additional battery charge indicator – it is red during charging and

becomes green when the charging is complete.

To charge the battery, either:

• connect the device to a computer using the USB cable, or

• connect the device to the car cigarette lighter socket using the car charger included.

Connecting to the computer

NOTES:

• To install applications and store your own files you can use either a memory card and flash memory.

• When the data are being transferred, do not disconnect the device from the computer to prevent the

possible damage or loss of data.

The device works with the following operating systems: Windows Me / 2000 / XP / Vista / 7.

After connecting the operating device to the computer via a USB cable to the device, select USB Connection and

Enable USB stick. The device will be detected by the computer as a portable hard disk and will be visible in

Windows Explorer.

Firmware upgrade

If necessary, you can upgrade the device firmware to a newer version. The latest firmware is available for

download at www.pentagram.eu . The downloaded new firmware archive contains detailed information on

preparing and performing the upgrade.