Operation Manual

PENTAGRAM PathFinder 6001
EN - 5
Getting Started
1. Install the battery
2. Turn on the GPS Bluetooth receiver.
Press the power button (the GPS Fix LED turns into green and
Bluetooth LED turns into Blue.)
3. Activate Bluetooth function of your PDA/PC
Prior to activating the Bluetooth function of your PDA/PC,
please make sure the device is equipped with Bluetooth
function, and the driver software has been installed.
4. Activate Bluetooth Manager & Established New
Connections. Illustrations using PocketPC:
a) First, find the device with which you wish to establish
connection.
b) Open „Bluetooth Manager” on your PocketPC
c) Follow the steps below
Tap New and then Connect! Select above option and tap Next