Operation Manual

horNET Giga PCI (P6111-1)
7
Installation
Installing the card in your computer
Ensure that you have sufficient workspace on your desk to perform the installation, and then
proceed as follows:
1. Turn off your computer (it is recommended to switch off the power supply or disconnect
the power cord from the computer).
2. Open the computer’s case.
3. Select a vacant PCI slot.
Port appearance Port name
PCI-Express x16
AGP
AGP Pro
PCI
4. Insert the card gently into the selected PCI slot, and then attach it to the chassis using a
screw.
Retainin
g
screw
Network card
PCI slots
Mainboard
5. Attach the appropriate network cable to the connector on the network interface card.
6. Close the case, connect the power cord and start the computer.