Operation Manual

horNET Giga PCI (P6111-1)

Features

• One port with automatic MDI/MDI-X switching, enabling the card to be connected quickly

to a switch or another computer.

• Jumbo Frames support to ensure high performance in new applications which require

large frame transfers (graphics and video editing applications).

• Auto-negotiation: speed (1000/100/10 Mbps) and full duplex/half duplex.

• Support for back-pressure (half-duplex) and IEEE802.3x (duplex) flow control to prevent

errors when transmitting and receiving data at different speeds.

• Status LEDs for quick network operation diagnostics.

• Full duplex support to double the effective network bandwidth.

• Wake-on-LAN (for PCI 2.2).

• 32-bit PCI Bus Master support for high performance at low CPU load.

• PCI 2.1 and PCI 2.2 compliance.

• Automatic IRQ (interrupt request) and I/O (input/output) address configuration.

Technical specifications

Data rate 10 Mbps, 100 Mbps, 1000 Mbps (autonegotiation)

Transfer mode

10/100 Mbps half-duplex, full duplex (autonegotiation)

1000 Mbps duplex

Standards supported

• IEEE 802.3: 10Base-T

• IEEE 802.3u: 100Base-TX

• IEEE 802.3ab: 1000Base-T

• IEEE 802.3x: flow control support with full duplex

• IEEE 802.1p: Layer 2 QoS

• IEEE 802.1q: Virtual LAN (VLAN) Tag and Jumbo

Frame support

Interface

One shielded RJ-45 connector with automatic crossover

sensing (Auto MDIX)

System bus PCI version 2.2

Cabling and connectors

RJ-45 (10Base-T): UTP Cat. 3, 4 or 5

RJ-45 (100Base-TX): UTP Cat. 5

RJ-45 (1000Base-T): UTP Cat. 5

Status LEDs Two connection activity LEDs: 1000 Mbps and 10/100 Mbps

Operating temperature 0 to 45°C (32 to 113°F)

Humidity 5-95% (non-condensing)