Operation Manual

PENTAGRAM Nomad Evo 5.0 [P 9450]

Search screen

In order to pair the device with a mobile phone, enable the

Bluetooth module in the paired phone, then search for it and

add to the devices list (the documentation that came with the

phone should contain detailed instructions on Bluetooth

enabling and configuration). The navigation system is identified

as GPS, and the default pairing PIN code is 8888 (you can

change the PIN code in the Settings screen of the Bluetooth

menu). After pairing, connect the phone and the device.

To exit the screen without pairing, tap the button in the

top right corner of the display.

Settings screen

The window contains the list of known Bluetooth devices.

1. Name identifying the device (read-only).

2. PIN code required for pairing with other Bluetooth devices.

3. Open the Set PIN Code window for entering a new PIN

code.

4. When this option is selected, the Bluetooth module will

remain enabled after you exit the Bluetooth menu. This is

not recommended because the enabled Bluetooth module

consumes more power.

5. When this option is selected, all incoming connections will be accepted automatically.

Tap the button to go back to the Bluetooth menu.

2 3