Operation Manual

PENTAGRAM Nomad Evo 5.0 [P 9450]

Battery charging

Before you start to operate the device, it is recommended to charge and discharge the battery several times so

that it reaches its full performance and service life.

In the top right corner of the main menu there is an icon representing the battery charge. When the icon is filled

with bars, it means the battery is fully charged. If the icon is empty, the battery is very low and you have to

charge it as quickly as possible. The battery will start charging automatically after connecting the device to the

AC charger or the car charger, plugged in the appropriate socket. During charging, you can operate the device as

normal. The light on the side panel is an additional battery charge indicator – it is red during charging and

becomes green when the charging is complete.

To charge the battery:

• connect the player to computer’s USB port, or

• connect the player to a power outlet via power USB charger, or

• connect the player to a car lighter socket via car USB charger

NOTE: Use only USB chargers supplied with the device. Using other chargers may cause device damage,

which warranty will not cover.

Memory card

Insert the memory card into the device in such a way so that when looking at the screen, the card connectors are

visible . When looking at the back casing of the device, the card label is visible. Press the card into the slot till

quiet click is heard, which means that card is in it's place.

To remove the card from the device, press the card (till quiet click can be heard) so that it gently slides out, and

then pull it out. Prior to removing the card, make sure that it is not used by the player and that no files are being

transferred from/to the card.

NOTE: Removing the card when it is in use can cause data loss or corruption.