Operation Manual

PENTAGRAM Nomad Evo 4.3 [P 9440]

Connecting to the computer

NOTES:

• Only use the the inserted memory card (visible as “SDMMC”) for the installation of applications and storage

of own files. Any other files stored beyond this location will be deleted when the system is turned off.

• When the data are being transferred, do not disconnect the device from the computer to prevent the

possible damage or loss of data.

The device works with the following operating systems: Windows Me / 2000 / XP / Vista / 7.

After connecting the USB cable three basic connection modes will be available.

• USB Mode (first icon) will connect the device as a portable device in Windows Explorer and start charging the

battery.

• Windows Mobile Device Mode (middle icon) will allow to sync and copy data, install Windows CE applications,

creating and restoring system backup copy (ActiveSync only). It may be required to download and install free

AtiveSync application (Windows Me, 2000, XP) or Windows Mobile Device Center (Windows Vista, 7).

• Charging Mode (third icon) will begin to charge the battery via the USB port.

Firmware upgrade

If necessary, you can upgrade the device firmware to a newer version. The latest firmware is available for

download at www.pentagram.eu . The downloaded new firmware archive contains detailed information on

preparing and performing the upgrade.