Operation Manual

PENTAGRAM Designer (P 2700)
Side buttons
The tablet has ten additional buttons (five on the left and five on the right
side of the working area), which add to its functionality. The top button, in
most graphics applications, launches the eraser function. Other buttons
work as the keyboard keys by default (as shown on the drawings beside).
You can assign them different functions using the tablet drivers.
Stylus replacement
When the pen is used for a longer period, its tip (stylus) will shorten because of rubbing off
against the tablet surface. The blunt tip does not precisely reflect the position and pressure
level, so you should replace it. The tablet is supplied with two additional tips and tweezers
facilitating the replacement. To replace the stylus, perform the following steps:
1. Hold the stylus with the tweezers (included) and delicately pull it out from the pen
housing.
2. Insert a new stylus in the place of the old one.
3. Carefully press the stylus as far as it will go, holding the pen horizontally.
7
EN