Operation Manual

Cerberus Wi-Fi Lite (P6381-0)
7
Back Panel
Label Used for...
1-4 (RJ-45) Connecting to computers/devices using the Ethernet cable
WAN (RJ-45) Connecting to a cable/DSL modem using the Ethernet cable
RESET Resetting the device.
PWR Connecting with supplied power adapter (9V 0,8A)
Default Settings
Before changing configuration familiarize yourself with these default settings.
IP Address 192.168.1.254
Subnet Mask 255. 255. 255.0
SSID Wireless-G Router
DHCP Server Enabled
DHCP Server IP Address Pool
100 IP addresses
from 192.168.1.100
IP Address Lease Time 86400 seconds (24 hours)
User Name root
Password 1234
It is recommended to change default password as soon as possible.
If you ever forget the password to log in, you may need to reset router to restore the factory
default settings. This procedure is described on the next page.