Operation Manual

Cerberus Wi-Fi Lite (P6381-0)

Advanced

Advanced: Port Forwarding

Use the Port Forwarding screen to forward service requests to the computer(s) behind the

Wireless-G Router. This allows you to set up web servers, FTP servers or special applications

that require Internet access (such as video conferencing or online gaming). Click Advanced >

Port Forwarding to display the configuration screen as shown.

Enable Port Forwarding – Select this option to activate this feature.

IP Address – Enter the IP address of the computer to which the service requests are

forwarded. For example, 192.168.1.100.

Note: You must set the computer to use a static (or fixed) IP address.

Protocol – Select a protocol type for the application. Choices are UDP, TCP or Both.

Port Range – Specify the service port number range in the fields provided. To specify one

port number, enter the same service port number in both fields.

Comment – Enter a description for this application.

Apply Changes – Click Apply Changes to save the changes. The Wireless-G Router will

reboot to make the changes take effect.

Reset – Click Reset to undo the changes.

Current Port Forwarding Table – This table displays the current port forwarding settings on

the Wireless-G Router.

Local IP Address – This field displays the IP address of the computer to which to forward the

specified service requests.

Protocol – This field displays the protocol type used for the application.

Port Range – This field displays a port number or a range of port numbers the Wireless-G

Router forwards.

Comment – This field displays the description for the setting.

Select – Select this option to delete the port forwarding rule.

Delete Selected – Click Delete Selected to delete the selected port forwarding rule(s). When

you click this button, a warning screen displays. Click OK to continue.

Delete All – Click Delete All to remove all port forwarding rule(s). When you click this button,

a warning screen displays. Click OK to continue.

Reset – Click Reset to clear the Select check box(es).