Operation Manual

Cerberus Wi-Fi Lite (P6381-0)
35
Wireless: Security: WEP: Set WEP Key
Click Set WEP Key to display the configuration screen as shown.
Key Length – Select the encryption key length. Choices are 64-bit and 128-bit. Select
128-bit for higher security.
Key Format – Specify how you want to enter the keys. Select Hex to enter hexadecimal
format (that starts with 0x). Select ASCII to enter alphanumerical characters (a-z, A-Z, 0-
9) for the keys.
Default Tx Key – Select the default key to encrypt data before transmitting.
Encryption Key 1 .. 4 – If you select 64-bit in the Key Length field, enter 10
hexadecimal or 5 ASCII characters. If you select 128-bit in the Key Length field, enter
26 hexadecimal or 13 ASCII characters.
Note: As you enter the keys, an asterisk “*” displays for each character you enter.
Apply Changes – Click Apply Changes to save the changes. The Wireless-G Router
will reboot to make the changes take effect.
Close – Click Close to close this screen.
Note: All unsaved changes will be lost.
Reset – Click Reset to undo the changes.