Operation Manual

Cerberus Wi-Fi Lite (P6381-0)

Preamble Type – A preamble is used to synchronize transmission timing.

• Select Long Preamble if there is interference in your wireless network or you are not

sure about the preamble settings on other wireless devices. All IEEE 802.11b devices

support long preamble.

• Select Short Preamble if all wireless devices support this mode. Short preamble reduces

transmission overhead.

Broadcast SSID – You can set the Wireless-G Router not to broadcast its SSID to increase

wireless security. This prevents unknown wireless clients from knowing the presence of the

Wireless-G Router. Select Enabled to hide the SSID. Otherwise, select Disabled.

IAPP – IAPP (Inter Access Point Protocol) allows the Wireless-G Router to communicate with

neighboring access points for wireless roaming. Select Enabled to activate this feature;

otherwise, select Disabled.

802.11g Protection – Unless you encounter severe connection problem to the Wireless-G

Router, do not enable this feature. When you select Enabled to activate this feature, the

Wireless-G Router will try to get all IEEE 802.11b packets. However, activating this feature

reduces performance.

Turbo Mode

• Auto – The Wireless-G Router will automatically detect the turbo mode client and adjust

its wireless connection speed.

• Always – The Wireless-G Router always turn on the turbo mode.

• Off – The Wireless-G Router does not turn on the turbo mode.

Apply Changes – Click Apply Changes to save the changes. The Wireless-G Router will

reboot to make the changes take effect.

Reset – Click Reset to undo the changes.

Help – Click Help to display on-line help information in a pop-up screen.