Operation Manual

Cerberus Wi-Fi Lite (P6381-0)

Regulation Domain – Select the name of your regulation domain.

Channel Number – A channel is the operating frequency in which a wireless device transmits

data. The number of channels you can select varies depending on the regulation domain you

select. Select a channel number the Wireless-G Router is to use for wireless communication.

To reduce interference, select a channel number that is further away from what the nearest

wireless device/network uses. For example, if the nearest wireless device/network is using

channel 6, set the Wireless-G Router to use channel 11.

Associated Clients – Click Show Active Clients to display a screen showing the list of

wireless clients that are currently connected to the Wireless-G Router.

Enable MAC Cloning (Single Ethernet Client) – You can set the Wireless-G Router to use

the same MAC address on all outgoing packets through the WLAN interface. Thus the

wireless network appears as a single Ethernet device to the external network. This increases

the security level. Enter a computer’s MAC address in six pairs of hexadecimal notation. For

example, 00a0f45a0010.

Enable Universal Repeater Mode – When you enable this universal repeater function, the

Wireless-G Router will extend the wireless distance to connect another wireless router or AP.

SSID of Extended Interface – Input the Parent SSID, when you select the Universal

Repeater Mode.

Apply Changes – Click Apply Changes to save the changes. The Wireless-G Router will

reboot to make the changes take effect.

Reset – Click Reset to undo the changes.

Help – Click Help to display on-line help information in a pop-up screen.

•

••

• Wireless Basic Settings: Site Survey

When you set the Wireless-G Router to work in wireless client mode, you can view a list

of available wireless networks/devices in the Site Survey screen. Use this screen to

establish a wireless connection to a device/network.

SSID – This field displays the name of a wireless network/device.

BSSID – This field displays for Infrastructure mode. This field displays the name of a

wireless network.

Channel – This field displays the wireless channel number the wireless network/device

uses.

Type – This field displays the wireless operating type (Infrastructure or Ad-hoc).