Operation Manual

Cerberus Wi-Fi Lite (P6381-0)
22
•
••
• WAN Interface Setup: PPTP
PPTP is mostly available in European countries. If your ISP provides you a fixed WAN IP
address, user name and password, then you are probably using PPTP connection type.
Select PPTP in the WAN Access Type field.
IP Address – Enter the WAN IP address (in dotted decimal notation) as provided by your
ISP. For example. 10.10.10.1.
Subnet Mask – Enter the subnet mask (in dotted decimal notation) for the WAN IP
address. For example. 255.255.255.0.
Server IP Address – Enter the IP address of the access server on the ISP network.
User Name – Enter the account user name as provided by the ISP. The user name is
case-sensitive.
Password – Enter the password associated with the user name above. The password is
case-sensitive.
Cancel – Click Cancel to start configuring the Setup Wizard again.
<<Back – Click <<Back to discard the changes and go back to the previous screen.
Next>> – Click Next>> to continue to the next screen.