Operation Manual

Cerberus Wi-Fi Lite (P6381-0)
20
•
••
• WAN Access Setup: Static IP
If your ISP provide you with a static WAN IP address without user name or password
information, select Static IP in the WAN Access Setup field. Set the network information
with the information provided by your ISP.
IP Address – Enter the WAN IP address (in dotted decimal notation) as provided by your
ISP. For example. 10.10.10.1.
Subnet Mask – Enter the subnet mask (in dotted decimal notation) for the WAN IP
address. For example. 255.255.255.0.
Default Gateway – Enter the IP address of the default gateway device.
DNS – A DNS (Domain Name System) server keeps mappings of IP addresses and
domain names. Thus you don’t have to enter an IP address to access a web site/device.
Enter the IP address of a DNS server in dotted decimal notation. For example,
192.168.1.10.
Cancel – Click Cancel to start configuring the Setup Wizard again.
<<Back – Click <<Back to discard the changes and go back to the previous screen.
Next>> – Click Next>> to continue to the next screen.