Operation Manual

Cerberus Wi-Fi Lite (P6381-0)
18
Setup Wizard: LAN Interface Setup
Configure the IP address and subnet mask of the LAN interface on the Wireless-G Router in
the second Setup Wizard screen.
IP Address – This field displays the router’s current LAN IP address, which is used to access
WebGUI. To change the setting, specify a new IP address for the LAN interface. Enter the IP
address in dotted decimal notation. For example, 192.168.1.254.
Subnet Mask – This field displays the current subnet mask. To change, enter a new subnet
mask in dotted decimal notation. For example, 255.255.255.0.
Cancel – Click Cancel to start configuring the Setup Wizard again.
<<Back – Click <<Back to discard the changes and go back to the previous screen.
Next>> – Click Next>> to continue to the next screen.