Operation Manual

Cerberus P 6381-2
50
Domain Name – Enter the Domain Name that you have gotten from dynamic DNS service
provider.
Enable DDNS – Select this check-box to enable DDNS function.
Connection Status - The status of the DDNS service connection is displayed here.
Click the Login button to login the DDNS service.
Click the Logout button to logout the DDNS service.
Click the Save button to save this settings.
System Tools / Time Settings
You can set time manually or get GMT from Internet for the router on this page.
Time Zone - Select your local time zone from this pull-down list.
Date - Enter date in this fields (MM/DD/YY format).
Time - Enter time in this fields (HH/MM/SS format)
Using Daylight Saving Time – Select this option to enable use of Daylight Saving Time.
DST begin - Enter date when Daylight Saving Time begins in this fields (MM/DD/HH format).
DST end - Enter date when Daylight Saving Time ends in this fields (MM/DD/HH format).
Preferable NTP Server – Enter IP Address of the primary and secondary NTP Server.
Get GMT – Click this button to get GMT from Internet if you have connected to Internet. Note:
Unsaved changes will be lost.
Click the Save button to save this settings.
Note:
• This setting will be used for some time-based functions such as firewall, if without time
limited, these functions will not take effect, so, make sure to specify your time zone once
you login to the router successfully.
• The time will be lost if the router is turned off.
• The router will obtain GMT automatically from Internet when it connects to Internet.
• The DST end will be considered a next year time if it is less than the DST begin.