Operation Manual

Cerberus P 6381-2
48
IP & MAC Binding / Binding Settings
To manage the computers well in the LAN, you could control access among computers by
ARP Binding.
ARP Binding – Select respective radio button to Enable or Disable ARP Binding function and
click the Save button.
MAC Address - The MAC address of the controlled computer in the LAN.
IP Address - The assigned IP address of the controlled computer in the LAN.
Bind – Select check-box to enable or deselect to disable the ARP binding.
Modify – Click Edit to open IP & MAC Binding Setting page or Delete to delete entry.
Add New… – Click this button to open IP & MAC Binding Setting page. Another way to add
hosts to binding list is to use the Load or Load All button on ARP list.
Enable All – Click this button to make all entries enabled.
Find - Click this button to search for entries based on host MAC Address or IP Address.
Click the Next button to go to the next page, or click the Previous button return to the
previous page or select page number on the Page pull-down list.
IP & MAC Binding Setting
Bind – Select check-box to enable or deselect to disable the ARP binding.
MAC Address - The MAC address of the controlled computer in the LAN.
IP Address - The assigned IP address of the controlled computer in the LAN.
Click the Save button to save this settings.