Operation Manual

Cerberus P 6381-2
43
Security / Domain Filtering
The Domain Filtering page allows you to control access to certain websites on the Internet by
specifying their domains or key words. Before adding a domain filtering entry, you must ensure
that Enable Firewall and Enable Domain Filtering have been selected on the Firewall page.
Firewall Settings – Status of options configured on Firewall page.
Effective Time - Range time (HHMM format) for the entry to take effect.
Domain Name - Domain or key word.
Status - The status of this entry, either Enabled or Disabled.
Modify – Click Modify to open Add or Modify a Domain Filtering Entry page or Delete to
delete entry.
Add New… – Click this button to open Add or Modify a Domain Filtering Entry page.
Enable All – Click this button to make all entries enabled.
Disable All – Click this button to make all entries disabled.
Delete All - Click this button to delete all entries.
Click the Next button to go to the next page, or click the Previous button return to the
previous page.
Add or Modify a Domain Filtering Entry
Effective Time - Enter a range of time in HHMM format, which points to the range time for the
entry to take effect. For example, 0803 - 1705, the entry will take effect frome 08:03 to 17:05.
Domain Name - Enter the domain or key word as desired in the field. For example:
www.xxyy.com.cn, or .net. A blank in the domain field means all websites on the Internet.
Status - Select Enabled or Disabled for this entry on the Status pull-down list.
Click the Save button to save this settings.