Operation Manual

Cerberus P 6381-2
42
Add or Modify a IP Address Filtering Entry
Effective Time - Enter a range of time in HHMM format, which points to the range time for the
entry to take effect. For example, 0803 - 1705, the entry will take effect frome 08:03 to 17:05.
LAN IP Address - Enter a LAN IP address or a range of LAN IP addresses in the field, in
dotted-decimal notation format. For example, 192.168.1.20 - 192.168.1.30. Keep the field
open, which means all LAN IP addresses have been put into the field.
LAN Port - Enter a LAN Port or a range of LAN ports in the field. For example, 1030 - 2000.
Keep the field open, which means all LAN ports have been put into the field.
WAN IP Address - Enter a WAN IP address or a range of WAN IP addresses in the field, in
dotted-decimal notation format. For example, 61.145.238.6 - 61.145.238.47. Keep the field
open, which means all WAN IP addresses have been put into the field.
WAN Port - Enter a WAN port or a range of WAN ports in the field. For example, 25 - 110.
Keep the field open, which means all WAN ports have been put into the field.
Protocol - Select which protocol is to be used, either TCP, UDP, or All (all protocols
supported by the router).
Action - Select either Allow or Deny through the router.
Status - Select Enabled or Disabled for this entry on the Status pull-down list.
Click the Save button to save this settings.