Operation Manual

Cerberus P 6381-2
41
Security / IP Address Filtering
The IP Address Filtering feature allows you to control Internet Access by specific users on
your LAN based on their IP addresses. Before adding a domain filtering entry, you must
ensure that Enable Firewall and Enable IP Address Filtering have been selected on the
Firewall page.
Firewall Settings – Status of options configured on Firewall page.
Effective Time - Range time (HHMM format) for the entry to take effect.
LAN IP Address - LAN IP address or a range of LAN IP addresses.
LAN Port - LAN Port or a range of LAN ports.
WAN IP Address - WAN IP address or a range of WAN IP.
WAN Port - WAN port or a range of WAN ports.
Protocol - Used protocol, either TCP, UDP, or All (all protocols supported by the router).
Action – Selected Action (Allow or Deny through the router) for this entry only.
Status - The status of this entry, either Enabled or Disabled.
Modify – Click Modify to open Add or Modify a IP Address Filtering Entry page or Delete
to delete entry.
Add New… – Click this button to open Add or Modify a IP Address Filtering Entry page.
Enable All – Click this button to make all entries enabled.
Disable All – Click this button to make all entries disabled.
Delete All - Click this button to delete all entries.
Move - You can change the entry's order as desired. Fore entries are before hind entries.
Enter the ID number in the first box you want to move and another ID number in the second
box you want to move to, then click this button to change the entry's order.
Click the Next button to go to the next page, or click the Previous button return to the
previous page.