Operation Manual

Cerberus P 6381-2

Add or Modify Wireless MAC Address Filtering entry

MAC Address - Enter the appropriate MAC Address into this field. The format of the MAC

Address is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). For example, 00-0A-EB-B0-00-

0B.

Description - Enter a simple description of the wireless station in this field. For example,

Wireless station A.

Privilege - Selects the privileges for this entry. Allow means allowing the station to access the

router. Deny means denying the station to access the router. 64-bit, or 128-bit, or 152-bit

means assigning a unique WEP key to access the router.

WEP Key - If you select 64-bit, or 128-bit, or 152-bit in the Privilege field, enter any

combination of hexadecimal digits (0-9, a-f, A-F) in the specified length. For example,

2F34D20BE2.

Status - Select Enabled or Disabled for this entry on the pull-down list.

Click the Save button to save this entry.

Wireless / Wireless Statistics

MAC Address - Connected wireless station's MAC address.

Current Status - Connected wireless station's running status, one of STA-AUTH / STA-

ASSOC / AP-UP / WPA / WPA-PSK / None.

Received Packets - Packets received by the station.

Sent Packets - packets sent by the station.

If the numbers of connected wireless stations go beyond one page, click the Next button to go

to the next page and click the Previous button to return to the previous page.

Note: This page will be refreshed automatically every 5 seconds.