Operation Manual

Cerberus P 6381-2
32
Wireless / MAC Address Filtering
Wireless MAC Address Filtering – Click on the button to Enable or Disable MAC Address
Filtering.
Filtering Rules - Decide whether the unspecified wireless stations can or cannot access the
router. If you desire that the unspecified wireless stations can access the router, please select
the radio button Allow the stations not specified by any enabled entries in the list to
access, otherwise, select the radio button Deny the stations not specified by any enabled
entries in the list to access.
MAC Address - The wireless station's MAC address that you want to access.
Status - The status of this entry, either Enabled or Disabled.
Privilege - Allow means allowing the station to access the router. Deny means denying the
station to access the router. 64-bit, or 128-bit, or 152-bit means assigning a unique WEP key
to access the router.
Description – Select this radio button to display simple description of the wireless station.
WEP Key - Select this radio button to display unique WEP key (in the Hexadecimal format) to
access the router.
Modify – Click Modify to open Add or Modify Wireless MAC Address Filtering entry page
or Delete to delete entry.
Add New… – Click this button to open Add or Modify Wireless MAC Address Filtering
entry page.
Enable All – Click this button to make all entries enabled.
Disable All – Click this button to make all entries disabled.
Delete All - Click this button to delete all entries.
Click the Next button to go to the next page, or click the Previous button return to the
previous page.
Note: If you enable the function and select the Deny the stations not specified by any
enabled entries in the list to access for Filtering Rules, and there are not any enable
entries in the list, thus, no wireless stations can access the router.